2D Virtual Impactor

Categories: Microfluidic devices  / FCB 
Manufacturer: TNO
Reference: -

Specification:

Operating temperatures: -10°C to 70°C
Internal volume: 657 µL
Dimensions: 2 x 15 x 30 mm

The single connector side is the input, the double connector side the output. The output is not filtered, the presence of two connectors is purely to increase outflow cross-section.

Place an adhesive surface over the open top of the device to which particulates will adhere. The device will separate particles based on size, diverting smaller >2.5 µm particles while not affecting larger particles.

Analysis of the distribution of particulates on the adhesive is the basis of measurement. 

Contact:  TNO

  http://www.tno.nl/en/
  +31 88 866 08 66

Contact form